Isono T., Sakamoto K., Baba T., Hemmi T., Shimizu T., Takano K., Tsutsumi F., Saito K., Kajitani H., Nakahira M., Nakamoto M., Kasai Y.
Ключевые слова: Japan, ITER, coils toroidal, design parameters, fabrication, facility, review
Ключевые слова: ITER, coils toroidal, coils insert, LTS, Nb3Sn, cable-in-conduit conductor, minimum quench energy, measurement technique, measurement setup
Breschi M., Koizumi N., Takahashi Y., Isono T., Hemmi T., Kawano K., Devred A., Martovetsky N., Bessette D., Suwa T., Gauthier F., Ozeki H.
Ключевые слова: ITER, coils toroidal, coils insert, loads, cycling, current sharing, temperature distribution, SULTAN, test results, strain effects
Ключевые слова: fusion magnets, Tokamak, coils toroidal, cryogenic systems, recovery characteristics, helium, stability, design, coils, discharge characteristics, safety
Ключевые слова: power equipment, transformers single phase, design parameters, HTS, Bi2223, protective system, ac losses, test results
Ключевые слова: ITER, central coils, quench propagation, thermal-hydraulics, experimental results, hot spots, numerical analysis, comparison
Ключевые слова: ITER, coils toroidal, induction heating, calorimetric method, experimental results, numerical analysis
Ключевые слова: ITER, central coils, coils insert, stability, test results, thermal-hydraulics, design, design parameters, minimum quench energy, LTS, cable-in-conduit conductor, Nb3Sn
Inoue T., Hoshino T., Muroga T., Koizumi N., Nunoya Y., Isono T., Sugimoto M., Suzuki S., Nakahira M., Ueda Y., Kawamura Y., Tanigawa H., Fukada S., Yamanishi T., Tobari H., Kashiwagi M., Kusama Y., Nakamichi M., Nozawa T., Hatano Y.
Ключевые слова: ITER, DEMO, cables, coils toroidal, central coils, Japan, fusion magnets, plans
Ключевые слова: Tokamak, magnetic systems, control systems, cryogenic systems, refrigerator, cooling technology, coils toroidal, bypass, HTS, current leads, quench detection
Zanino R., Bruzzone P., Breschi M., Isono T., Zani L., Devred A., Martovetsky N., Nabara Y., Bessette D., Bonifetto R., Savoldi L.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, test results, SULTAN, mechanical properties, strain effects
Ключевые слова: central coils, coils model, LTS, Nb3Sn, cable-in-conduit conductor, comparison, thermal-hydraulics, test long-term operation, experimental results, ITER
Martovetsky N., Isono T., Bessette D., Takahashi Y., Nunoya Y., Nabara Y., Ozeki H., Kawano K., Saito T., Suwa T., Okuno K., Devred A., Gauthier F., Mitchell N., Zanino R., Savoldi L., Bonifetto R., Breschi M., Ciazynski D., Reiersen W., Smirnov A., Khodak A., Bruzzone P., Rodin I.*10, Tronza V.*11, Torre A., Nicollet S., Zani L., Louzguiti A., Duchateau J.-L.
Ключевые слова: ITER, central coils, coils insert, test results, degradation studies, ac losses, mechanical properties, strain effects, quench propagation, stability, heating rates
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Shibutani K., Nabara Y., Murakami Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Suwa T., Ozeki H., Sedlak K., Takano T., Sakurai T.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, central coils, ITER, current sharing, cycling, electric field, temperature dependence, mechanical properties, strain effects, ac losses
Okuno K., Suzuki Y., Isono T., Smirnov A., Semba T., Kawano K., Martovetsky N., Kawasaki T., Kido S., Hasegawa H., Uno Y., Ebisawa N., Ozeki H., Ichimura T., Inoue S., Kuchiishi Y.
Koizumi N., Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Shibutani K., Nabara Y., Murakami Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Suwa T., Matsuda H., Ozeki H., Takano T., Sekiguchi N., Sakurai T.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, cable-in-conduit conductor, twist-pitch, fabrication, critical caracteristics
Okuno K., Suzuki Y., Isono T., Saito T., Smirnov A., Semba T., Kawano K., Martovetsky N., Kawasaki T., Kido S., Hasegawa H., Ozeki H., Nishino K., Ichimura T., Inoue S., Kuchiishi Y.
Ключевые слова: ITER, coils toroidal, fabrication, coils insert, welding, winding configurations, cables, termination, tensile tests, joints, jacket
Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Kawano Y., Shibutani K., Nabara Y., Oshikiri M., Uno Y., Teshima O., Suwa T., Ozeki H., Sekiguchi N., Kanaya M.
Ключевые слова: ITER, central coils, jacket, eddy currents, acoustic emission, measurement technique, LTS, Nb3Sn, cable-in-conduit conductor, defects, size effect, experimental results
Koizumi N., Okuno K., Isono T., Martovetsky N.N., Smirnov A., Kawano K., Sakamoto H., Minato T., Kajitani H., Sasaki T., Ozeki H., Nishimiya H., Watabe Y.
Ключевые слова: ITER, central coils, coils insert, LTS, Nb3Sn, cable-in-conduit conductor, design parameters, termination, fabrication, heat treatment, insulation
Bruzzone P., Stepanov B., Park S., Nunoya Y., Okuno K., Takahashi Y., Isono T., Hemmi T., Lee J., Kawano K., Sim K., Tsutsumi F., Shibutani K., Nabara Y., Park P., Oshikiri M., Kwon S.P., Suwa T., Ozeki H., Sedlak K., Han I., Jang K.
Ключевые слова: ITER, central coils, mechanical properties, jacket, heat treatment, aging, fatigue behavior, crack formation, test results
Ключевые слова: ITER, central coils, jacket, mechanical properties, joints, tensile tests, fracture behavior, fatigue behavior, crack formation, test results
Nabara Y., Hemmi T., Kajitani H., Ozeki H., Suwa T., Iguchi M., Nunoya Y., Isono T., Matsui K., Koizumi N., Tsutsumi F., Uno Y., Oshikiri M., Shibutani K., Takahashi Y., Okuno K., Murakami Y., Miyatake T., Sugimoto M., Takagi A., Nakada Y., Miyashita K., Sedlak K., Stepanov B., Bruzzone P.
Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Sugimoto M., Hemmi T., Kawano K., Sato G., Tsutsumi F., Shibutani K., Nabara Y., Kawasaki T., Murakami Y., Oshikiri M., Uno Y., Ozeki H., Tani M., Nakata Y.
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Shibutani K., Nabara Y., Miyatake T., Murakami Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Suwa T., Ozeki H., Sedlak K.
Furuse M., Fuchino S., Okano M., Fujihira J., Uchida A., Fujihira S., Kadono T., Fujimori A., Koide T.
Bruzzone P., Stepanov B., Mitchell N., Nunoya Y., Okuno K., Takahashi Y., Isono T., Hamada K., Vostner A., Rey C.M., Devred A., Martovetsky N., Bessette D., Pong I., Reiersen W.
Ключевые слова: ITER, central coils, LTS, Nb3Sn, strands, wires multifilamentary, cable-in-conduit conductor, design, SULTAN, test results, twist-pitch
Koizumi N., Nunoya Y., Matsui K., Nakajima H., Okuno K., Takahashi Y., Isono T., Hamada K., Hemmi T., Kawano K., Tsutsumi F., Yano Y., Shibutani K., Nabara Y., Murakami Y., Ishibashi T., Oshikiri M., Uno Y., Tsuzuku S., Teshima O.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, twist-pitch, fabrication, experimental results
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Nakajima H., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Nabara Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Ozeki H., Sedlak K.
Koizumi N., Nunoya Y., Matsui K., Nakajima H., Okuno K., Takahashi Y., Isono T., Hamada K., Hemmi T., Yoshikawa M., Kawano K., Tsutsumi F., Nabara Y., Murakami Y., Ishibashi T., Oshikiri M., Uno Y., Tsuzuku S., Yamashita A., Teshima O.
Ключевые слова: LTS, Nb3Sn, ITER, coils toroidal, fabrication, cable-in-conduit conductor, jacketing, design parameters, bronze process
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Nakajima H., Takahashi Y., Isono T., Hamada K., Hemmi T., Yoshikawa M., Nabara Y., Kajitani H.
Koizumi N., Nunoya Y., Matsui K., Nakajima H., Takahashi Y., Isono T., Hemmi T., Nabara Y., Hamda K.
Ключевые слова: LTS, Nb3Sn, central coils, coils insert, ITER, cable-in-conduit conductor, strands, electric field, voltage, modeling, facility
Ключевые слова: magnetic separation, magnets, design, experimental results
Furuse M., Fuchino S., Okano M., Fujihira J., Uchida A., Fujihira S., Kadono T., Fujimori A., Koide T.
Jewell M.C., Koizumi N., Nunoya Y., Nakajima H., Takahashi Y., Isono T., Hamada K., Libeyre P., Saito T., Kawano K., Devred A., Yano Y., Bessette D., Oshikiri M., Uno Y., Matsuda H.
Ключевые слова: ITER, central coils, fabrication, LTS, NbTi, cable-in-conduit conductor, jacketing, welding
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Nakajima H., Takahashi Y., Isono T., Hemmi T., Yoshikawa M., Nabara Y.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, test results, SULTAN, voltage
Ключевые слова: LTS, Nb3Sn, strands, ITER, design parameters, numerical analysis
Ключевые слова: LTS, Nb3Sn, strands, ITER, measurement technique, strain effects, critical current, critical caracteristics
Murakami M., Hirabayashi I., Sakai N., Kono T., Jirsa M., Muralidhar M.(myriala1@istec.or.jp)
Murakami M., Hirabayashi I., Sakai N., Kono T., Jirsa M., Muralidhar M.(myriala1@istec.or.jp)
Koizumi N., Takahashi Y., Inaguchi T.(inaguchi.takashi@wrc.melco.co.jp), Hasegawa M., Isono T., Hamada K., Sugimoto M.
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, coils, ITER, quench, modeling, numerical analysis, power equipment, magnetic properties
Nagaya S., Kashima N., Inoue K., Hakuraku Y., Doi T.(doi@eee.kagoshima-u.ac.jp), Kozono T.
Ключевые слова: HTS, YBCO, REBCO, coated conductors, substrate Ag, PLD process, MOD process, microstructure, current-voltage characteristics, fabrication, critical caracteristics
Murakami M., Sakai N., Koshizuka N., Nakao K., Muralidhar M., Kono T.(kono@istec.or.jp)
Murakami M., Sakai N., Koshizuka N., Katagiri K., Kono T., Iida K., Murakami A., Kaneko T.(kaneko@istec.or.jp)
Ключевые слова: HTS, YBCO, bulk, grain boundaries, mechanical properties, microstructure, fracture behavior, tensile tests, crack formation, fabrication, experimental results, solder
Nishijima G., Koizumi N., Matsui K., Ando T., Okuno K., Takahashi Y., Isono T., Sugimoto M., Nunoya Y.(nunoya@naka.jaeri.go.jp)
Nunoya Y., Ando T., Okuno K., Ono M., Hasegawa T., Ohtani N., Isono T.(isonot@naka.jaeri.go.jp), Ozaki A., Koizumi T.
Osamura K., Matsumoto K.(matsu@hightc.mtl.kyoto-u.ac.jp), Takechi A., Ono T., Hirabayashi I.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, buffer layers, PLD process, microstructure, experimental results, fabrication, magnetic properties
Osamura K., Ono T., Hirabayashi I., Matsumoto K., Takechi A.(takechi@kumax.kyoto-u.ac.jp)
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, SOE process, cap layers, PLD process, microstructure, critical current density, fabrication, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.